Guide to Fix Netgear AC1200 Router Keeps Disconnecting Issue

Guide to Fix Netgear AC1200 Router Keeps Disconnecting Issue

It’s a pretty normal thing when your Netgear AC1200 router disconnects once or twice. However, the real problem arrives when your device continues to behave this way for weeks. Luckily, our technical experts are here to assist you. So, instead of getting frustrated, consider walking through this post.

Here, you’ll find the most effective Netgear router troubleshooting tips that will help you fix the AC1200 router keeps disconnecting issue. Continue reading.

Fixed: Netgear AC1200 Router Keeps Disconnecting

a) Move the Router Closer to the Modem

One of the major reasons why your Netgear AC1200 router keeps disconnecting is because it is placed away from the existing modem. To troubleshoot the issue, make sure that your WiFi devices are placed in close proximity.

Apart from taking care of the distance, also ensure that the connection between your devices is stable. If by any chance, the Ethernet cable connecting your AC1200 WiFi router and the modem is worn out, get it replaced with a new one immediately.

b) Keep WiFi Interference at Bay

Chances are that the signals of your Netgear AC1200 router are getting interrupted because of transmitting appliances, reflexive surfaces, electronic devices, and metal objects.

Therefore, consider placing your home router away from things like Bluetooth speakers, treadmills, televisions, refrigerators, and microwave ovens. Also, avoid placing it near fish tanks, mirrors, aluminum studs, cordless phones, washing machines, baby monitors, etc.

If your Netgear AC1200 wireless router still keeps disconnecting, then perhaps you should consider updating its firmware.

c) Perform Netgear Firmware Update

Here are the guidelines that you should follow in order to update the firmware of your Netgear AC1200 router to the latest version:

  • Connect your router and the existing modem properly.
  • Turn on your computer or laptop (whatever you prefer using) and launch an internet browser.
  • In the address bar of the web browser, type, and hit Enter.
  • The Netgear page will appear on your screen.
  • Enter the default username and password of your device and click Log In.
  • On the Netgear Genie dashboard, head over to the Settings option.
  • Under the Maintenance option, select Firmware Update.
  • Now, follow the on-screen instructions.

In this manner, you’ll be able to update the firmware of your AC1200 WiFi router.

Note: While trying to perform Netgear firmware update of your AC1200 router, if you get stuck at any point, feel free to get in touch with our well-versed technical experts. They are available for you 24x7.

d) Contact Your Internet Service Provider

If you’re still struggling with the Netgear AC1200 router keeps disconnecting issue, then it’s probably because of a weak internet connection.

Thus, get in touch with your Internet Service Provider and request him to get the issue fixed. If his efforts go in vain, then resetting your wireless device is the last option you’re left with.

e) Reset Your Netgear AC1200 Router

Here’s how to restore your Netgear wireless router to the factory default settings:

  • Look at all sides of your AC1200 router and locate the Reset button.
  • Once located, carefully press it using an oil pin or a paper clip.
  • You can also press the Reset button using a toothpick.
  • Now, wait for a few seconds.

The minute you finish the reset process, perform Netgear AC1200 setup from scratch.

Wrapping Up

In order to access a blazing-fast internet connection, it is important that you stay connected to your Netgear AC1200 router’s network. However, if your router keeps disconnecting over and over again, then consider following the troubleshooting tips mentioned in this post. If even after following them, your Netgear AC1200 router keeps disconnecting, then, trust us, contacting our well-versed technical experts is the right thing to do.

Disclaimer: We at provide information for issues related to routers, their setup and installation.Any use of Trademarks, Brands, Products and Services is referential and hereby, disclaims any association, affiliation – direct or indirect, or representation in any form, of any such brand, product or service.